Logitech Harmony 525 Universal Remote

For Christmas I bought Phil a Logitech Harmony 525 Universal Remote Control (now there’s a mouthful!).

I first used it last Tuesday, but it’s taken me until today to actually get it to work, via various support calls and so on! I don’t really want to bore you with the details, but just get to the meat of what the problem was — I couldn’t find any information on the problem I was having at all, so hopefully this will help someone else who’s having a similar issue.

I had two problems, the first one is more major than the second one. The first problem was that I couldn’t initialise the remote control. Each time I tried, this happend:

Initializing services
Getting remote control information
Logitech Harmony Remote Software version: 7.3.2
Hardware version: Board 2.5.0 (0xFF:0x12)
Firmware version: 2.0
Getting remote control information - Successful
Checking version information
Checking version information - Successful
Waking the remote control
Waking the remote control - Successful
Getting remote control states
Getting remote control states - Successful
Uploading remote control information to web
Initializing the remote control. Please wait...
Uploading remote control information to web : ServiceExceptionServiceFailed - The information was not sent. Check your USB cable and try again. If the problem persists, contact customer service.

Now, I’m not 100% sure what the problem was, but after contacting customer support I was (eventually) told to check none of the buttons were pressed down on the remote. Apparently, buttons being pressed down on the remote can cause the remote to stop responding, so you need to make sure that they are all up and not jammed down.

The reason I’m not 100% sure that this worked is because I also tried using the web-based software at myremotesetup.com (not members.harmonyremote.com). I also set up an HTTP Debug Proxy to check exactly what was being sent to and from the server and if anything was going wrong there.

Anyway, something of the above — and I admit it was probably unjamming the buttons — stopped the problem from happening, and I was able to initialise the remote.

The other problem I was having was not being able to login to the software. I could create an account without any problems, but I couldn’t actually login using the account I created! I just entered my username and password and the software would just hang, until I got a message saying that the connection had been reset (in a message format which looked rather like Firefox – the software you get on the CD basically connects to the website).

By using Fiddler2 (the HTTP Debug Proxy mentioned above) I was able to ascertain that there’s a page on the members.harmonyremote.com website which doesn’t seem to be working properly, however I’m not sure exactly why. It doesn’t really matter as I can use the web-based version of the software without problems.

Anyway, I hope that all this helps someone else!


Comments

One response to “Logitech Harmony 525 Universal Remote”

  1. Brilliant – thanks – I had a stuck button! How simple was that?

Leave a Reply

Your email address will not be published. Required fields are marked *

Related posts

Get new posts by email